Type S-K100-Z High-performance cooling finger V2A large S-K100-Z

Technical data sheet

Cold trap catalog

Application

• Gas purification by condensation, e.g. in vacuum systems

Advantages

• Baffles for optimized condensation
• made of stainless steel 1.4301 (1.4404 on request)
• High thermal resistance
• Simple, cost-effective design
• Quick change possible
• Large condensate volume
• two-part

• Quick change possible

Executions

• KF NW25 = small flange
• Special dimensions
• Special connections

Two-part cold trap

A special design are two-part cold traps in the standard version, with an ISO-K 100 flange as the connecting part. With this cold trap, the condensate compartment can be separated from the upper part of the cold trap. This makes it very easy to remove the condensate and clean the cold trap. This version is also suitable for fixed installation of the cold trap in an appliance, as only the lower part needs to be removed from the cold trap to drain the condensate. The ISO-K 100 connector is secured with 4 ISO-K clamp screws.

Technical data cooling finger S 54V