Type KF54V-K16-Z-18C Cold trap V2A complete KF54V-K16 / KF54V-K25

Technical data sheet

Cold trap catalog

Application

Gas purification by condensation, e.g. in vacuum systems

Advantages

made of stainless steel 1.4301 (1.4404 on request)
High thermal resistance
High thermal resistance
Simple, cost-effective design
Quick change possible
two-part
Pressure range: Vacuum up to 10-6 mbar, pressure up to 3 bar overpressure

Executions

KF NW16 = small flange
KF NW25 = small flange
Special dimensions
Special connections

Two-part cold trap

A special design are two-part cold traps in the standard version, with a KF NW 50 flange as the connecting part. With this cold trap, the condensate compartment can be separated from the upper part of the cold trap. This makes it very easy to remove the condensate and clean the cold trap. This version is also suitable for fixed installation of the cold trap in an appliance, as only the lower part needs to be removed from the cold trap to drain the condensate. The KF NW 50 connector is secured with a quick-release fastener.